幸运农场

联系我们

联系人: 刘经理 手机: 15953131568        18888346536 QQ: 408031499 网址:  地址: 济南市天桥区金牛建材市场

新闻中心当前位置:首页—新闻中心

济南卷帘门厂讲解安装过程
2015-6-6 11:37:32
当墙体洞口为混凝土时,应在洞口内埋设预埋件,然后与导轨、轴承架焊接连接;当墙体洞口为砖砌体时,可采用钻孔埋设胀锚螺栓,与导轨、轴承架连接。导轨安装时应先进行找直、吊正,槽口尺寸应准确,上下保持一致,对应槽口应在一平面内,然后用连接件与洞口内的预埋件焊牢。      济南卷帘门厂   
  When the opening in the wall for the concrete should be embedded part is embedded in the hole, and then with guide rail, a bearing frame welding connection; when the mouth of the cave wall brick masonry, the borehole embedded expansion bolt, guide rail, bearing frame connection. When installing guide rail are straight, crane, notch size should be accurate, the upper and lower consistent, corresponding to the notch shall be in a plane, and then use the connecting piece and the opening of the embedded parts to be welded.
  安装卷筒应先找好尺寸,并使卷筒轴保持水平位置,注意与导轨之间的距离应两端保持一致,临时固定后进行检查.并进行必要的调整、校正,无误后再与支架预埋件用电焊焊牢。锁具安装。锁具的安装位置有两种,轻型卷帘门窗的锁具应安装在座板上,门的锁具也可安装在距地1m处。
  Mounting reel should first find a good size, and the drum shaft to maintain the level of the position, pay attention to and the distance between the guide rails both ends shall be consistent temporary fixed for inspection. And make the necessary adjustments, correction, and correct and bracket embedded parts by welding welded. Lock installation. The installation position of the lock has two, lock of light shutter doors and windows should be installed on the seat board, door locks can also be installed in the ground at 1m from the.
友情链接:金彩彩票app  盛兴彩票官网  大发彩票官网  盛兴彩票登陆  欢乐彩票  盛兴彩票网站  盛兴彩票娱乐  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!