幸运农场

联系我们

联系人: 刘经理 手机: 15953131568        18888346536 QQ: 408031499 网址:  地址: 济南市天桥区金牛建材市场

新闻中心当前位置:首页—新闻中心

卷帘门的门体连接件如何进行制作使用?
2018-3-21 16:29:15
现有的门体连接件一般釆用u型薄板通过折弯包边形式用螺钉固定在门体边 侧上。门体面材有用不锈钢薄板制成的,也有用铝合金等金属材料制成的。现有的 门体连接件不能用于各种复合门板,亦无法使用不能折弯的面材,如不锈钢面板不 能平整地紧贴装配在门体上,造成不锈钢面板鼓起、开裂,使得装配难度增大。安装现有的门体连接件后,导致门体重量很重。
Connected with the door body existing general sheet bending by using U - wrapping style with screws fixed on the door body side. The portal material is made of stainless steel sheet and is also made of metal materials such as aluminum alloy. The existing door connector can not be used for all kinds of composite door panels, nor can it use non bending surface materials, such as stainless steel panels, which cannot be tightly pressed on the door body, causing the stainless steel panels to bulge and crack, making assembly difficult. After installing the existing door joints, the body weight is very heavy.
另外,济南卷帘门现有的u型薄板的包边具有一定的厚度,而且有刃角,该刃角处极易划伤人体皮肤。 实用新型内容本实用新型的任务是提供一种改进的门体连接件,它解决了现有的门体连接件不能用于各种复合门板,安装原有u型薄板后门体重量重、装配难度大以及包边有刃角的问题。
In addition, u Ji'nan existing rolling door sheet wrapping with a certain thickness, and the blade angle, the blade angle is easy to scratch the skin. The content of the utility model of the utility model is to provide an improved door connector, which solves the existing door connection cannot be used for a variety of composite panels, installation of the original U-shaped sheet back weight weight, difficult assembly and wrapping edge angle problem.

本实用新型的技术解决方案如下一种门体连接件,它包括门体和长条状U型型材,U型型材夹装于门体边侧, 所述u型型材的二端各被夹装有夹板,二个夹板分别夹装在门体边侧的上角和下 角上,每个夹板的另端装有与u型型材成同一轴线的长销,构成上夹板的上长销和下夹板的下长销,上长销和下长销分别套装在门体的上定位套件和下定位套件 内。

济南卷帘门厂

The technical proposal of the utility model are a door body connecting piece, which comprises a door body and strip type U profiles, U profiles are clamped in the door body side, wherein the two ends of the U-shaped section is equipped with a splint splint, two respectively clamped on the door at the side of the corner and on the other end of each corner, a splint with a long pin the same axis with the U-shaped profile, form a long pin splint on the long pin and the lower plate, on the long pin and a long pin are respectively sleeved on the positioning of the door body and the lower positioning kit kit.
济南卷帘门厂的连接件采用u型型材,通过位于二端的夹板夹装在u型型 材和门体边侧上,再用螺钉固定。u型型材的边角设计成圆角,以避免划伤人体皮肤。本实用新型的门体连接件制作简单,装配容易,外形美观大方,适用于各种门 体面板材料,减轻了门体重量,还可广泛用于各种复合门板。
Connections with U-shaped profiles of Ji'nan rolling shutter door factory, located in the end of two through the splint clamping in U profile and the door body side, fixed by screws. U profile corner design rounded corners, to avoid scratching the skin. The door body connector of the utility model has the advantages of simple manufacture, easy assembly, beautiful appearance, and suitable for various door panel materials, which reduces the weight of the door body, and can also be widely applied to various composite door plank.
安装本实用新型的门体连接件时,先将u型型材包覆于门体边侧,在u型型 材中间凹槽处加装密封条,再将上夹板和下夹板夹装在u型型材和门体边侧上,用螺钉固定,然后将装于夹板上的上长销和下长销套装到门体的上定位套件和下定 位套件内,门体连接件与门体就此装配完毕。
Install the door body of the utility model connections, the U-shaped profile wrapped in the door body side seal installed in the U-shaped groove at the middle section, the upper plate and the lower plate is clamped on the U-shaped profiles and the door body side, fixed by screws, and then loaded on the splint on location the suite on the long pin and a long pin suit to the door body and the door body positioning kit, connector and the door body assembled thereon.
友情链接:盛兴彩票官网  盛兴彩票娱乐  环球彩票  金彩彩票  金彩彩票官网  欢乐彩票平台  大发彩票娱乐  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!